Scania L Series Product Information page 74

Recovery and shunting
• Recovery from the front, vehicle with air suspension
During recovery from a ditch, the front axle by the air bellows attachment is a
suitable towing point.
• Recovery from the rear and from the side
Attach the recovery equipment to the body frame when the vehicle is pulled
backwards or sideways.
Alternative procedure for recovery of vehicles on a level surface
Scania recommends using the recovery tool. The recovery tool is designed for
lifting the vehicle. The recovery tools should be fixed with 3 screws on both
sides of the vehicle.
IMPORTANT!
The recovery tool must not be used if the front axle weight of the vehicle to
be recovered exceeds 10 tonnes.
If the vehicle has several front axles, the total front axle weight must not
exceed 10 tonnes.
• Recovery using 2 426 174 Recovery tool
00:01-08 Issue: 8 en-GB
© Scania CV AB 71 (103)