Vehicles With Electrohydraulically Steered Tag Axle - Scania L Series Product Information

Recovery and shunting

Vehicles with electrohydraulically steered tag axle

NOTE:
If the battery voltage of the towed vehicle is low, there is a risk that EST
will not be able to be adjusted without connecting jump leads.
Switch off the voltage to lock the tag axle in its current position.
If the yellow system warning lamp is on:
• The tag axle is centred automatically when the yellow warning lamp is on.
• Switch off the power to lock the tag axle in the centred position.
If the red system warning lamp is on:
• The tag axle is self-steering or locked in the central position.
• In the case of a serious system fault, the tag axle may need to be centred
manually.
– Centre the tag axle manually or tow the vehicle straight ahead until the
tag axle is centred. The ignition must be switched on when the centring
is being done.
– Switch off the power to lock the tag axle in the centred position.
00:01-08 Issue: 8 en-GB
© Scania CV AB 83 (103)