Table of Contents
Advertisement
Tip: Before you use your MiFi 500, be sure to charge the battery for at least 3.5 hours to ensure a full
initial charge.
CAUTION! Use only batteries and chargers with your MiFi 500 that have been approved by Sprint.
The failure to use approved batteries and chargers may increase the risk that your MiFi 500 will
overheat, catch fire, or explode, resulting in serious bodily injury, death, or property damage.
Battery Removal
Under certain circumstances you may need to remove the battery from your MiFi 500. For battery
removal or replacement:
1. Press your finger against the battery door removal tab, then lift and remove the battery cover.
Set the cover aside.
2. Insert your finger into the battery removal divot and lift the battery out of the battery
compartment.
Battery Tips
The following battery tips should help you get the most out of your device battery.
WARNING! Always use only approved batteries and chargers with your MiFi 500.The warranty
does not cover damage caused by non-approved batteries and/or chargers.
It normally takes at least 3.5 hours to fully charge the battery with the AC charger.
n
Do not use sharp objects to access the battery compartment, as this may damage the MiFi 500
n
and the battery.
Do not use excessive force to remove the battery or to access the battery well.
n
The battery discharges more rapidly as additional devices access your MiFi 500.
n
Battery life depends on the network, signal strength, temperature, features, and accessories you
n
use.
New batteries or batteries stored for a long time may take more time to charge.
n
When charging your battery, keep it near room temperature.
n
Getting Started with MiFi 500
7
Advertisement
Table of Contents
