Advertisement
Quick Links
Advertisement
Related Manuals for SeaLevel DIO-16.LCPI
Summary of Contents for SeaLevel DIO-16.LCPI
- Page 1 DIO-16.LCPI Sealevel Systems, Inc. Sealevel.com Phone 864.843.4343...
- Page 2 APPENDIX A - TROUBLESHOOTING ........................... 27 ............................27 OFTWARE ............................28 ARDWARE BIOS ..............................29 ......................29 EVICE ANAGER ERIFICATION IO C ..........30 ROUBLESHOOTING ERIFICATION TILITIES FOR LASSIC RODUCTS SEAIO DEVICE DRIVER CONFIGURATION ......................34 ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 3 APPENDIX E - HOW TO GET ASSISTANCE ......................40 ........................... 40 ECHNICAL UPPORT WARRANTY ..................................... 41 ..........................41 ARRANTY OLICY ......................41 ARRANTY EPAIR ETEST RMA (R ) ............41 OW TO OBTAIN AN ETURN ERCHANDISE UTHORIZATION ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 4 The DIO-16.LPCI is shipped with the following items. If any of these items is missing or damaged, please contact Sealevel for replacement. DIO-16.LPCI Adapter Item# 8012 ships with Low Profile PCI bracket Item# 8012S ships with a Standard PCI bracket ...
- Page 5 Depending upon your application, you are likely to find one or more of the following items useful for interfacing the DIO-16.LPCI to real-world signals. All items can be purchased from our website (http://www.sealevel.com) or by calling +1 864- 843-4343. DB44 Male to DB44 Female, 72” Extension Cable (Item# CA185) The CA185 is a standard DB44M to DB44F extension cable.
- Page 6 The Digital I/O Handbook – A Practical Guide to Industrial Input and Output Applications (Item# REF101) Renowned technical author Jon Titus and president and CEO of Sealevel Systems, Tom O'Hanlan, clearly explain real-world digital input/output implementation from both a hardware and software perspective. Whether you...
- Page 7 Highly reliable 10VA Reed relays MD1 Low Profile and Universal Bus (3.3V and 5V) compatible Power (+5V and +12V) and ground provided on connector SeaI/O Classic software supports Windows and Linux Operating Systems ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 8 REL-32.PCI 8007 32 Reed Relay Outputs PLC-16.PCI 8011 8 Form C Relay Outputs/8 Opto-isolated Inputs DIO-32.PCIE 8004e 16 Reed Relay Outputs/16 Opto-isolated Inputs DIO-32.PCIE 8004He 16 Reed Relay Outputs/16 Opto-isolated Inputs (10-30V) ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 9 If the media is otherwise unavailable or if desired, the current versions of Sealevel software packages can be obtained from the Sealevel website (see following instructions). If you already have the Sealevel software, proceed to the Windows or Linux installation section.
- Page 10 Insert the Sealevel media into your PC. If the „AutoRun‟ feature is enabled for this media the software will automatically launch. Otherwise, navigate to the root directory of the media and double-click the „autorun.exe‟ application to launch the installation window.
- Page 11 „C:\Program Files‟ folder on your computer. Some versions of Windows will halt the installation and provide you with a dialog box which will ask you for permission for the installer to make changes to your ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 12 Once the installation is complete, close the disk installation window. 6. Refer to the Physical Installation section to connect and install your hardware. 1. To install a software package from the Sealevel media, browse the Sealevel Systems media ‟Software‟ directory. For example: Software\SeaIO\Windows\SeaIO Installer.exe...
- Page 13 Most Sealevel Linux software is distributed as source code. To use the software, it must be compiled. Refer to the README file in each package for system prerequisites. You must have administrative privileges to install the software. It is not necessary to have administrative privileges to build or use the software.
- Page 14 Test utilities were compiled in Step 8, and they are located in the package‟s folder named seaio/utilities/ and installed globally in Step 10 to: /usr/bin. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 15 PCI Express x1 Do not install the adapter in the machine until the product software has been fully installed. To prevent damage from improper handling, please reference Appendix A – ESD Handling Instructions. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 16 5. Replace the screw you removed for the blank and use it to secure the adapter bracket into the slot. This is required to ensure FCC Part 15 compliance. 6. Replace the cover. 7. Connect the power cord. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 17 Sealevel‟s SeaI/O software is provided to assist in the development of reliable applications for the Sealevel Systems family of digital I/O adapters. Included on the SeaI/O CD are driver functions for use in accessing the I/O as well as helpful samples and utilities.
- Page 18 When enabled, interrupts are generated on Port A bit D0. IRQEN Interrupt enable 1 = enabled 0 = disabled ( 0 on power up ) IRC0 Interrupt mode select, see table below IRC1 Interrupt mode select, see table below ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 19 High or Low state. This will cause the computer to remain in an interrupt state until the input state changes. Reading the Interrupt Status port (Base+5) clears any interrupt pending. IRQST (D0) Interrupt Status 1 = interrupt pending, 0 = none ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 20 Port A Bit Port A Pins 2,40 3,41 4,36 5,37 6,38 7,42 8,43 9,44 ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 21 The relays are normally open, and close when energized. Port C Bit Relay Port C Pins 10,28 11,29 12,30 13,31 14,32 15,33 16,34 17,35 ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 22 In the DB-37 diagram below the return path is supplied external to the connector. For complete electrical isolation, each relay can be wired to an independent isolated circuit. Ground 22,23,24 + 5 Volts + 12 Volts ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 23 If the current flow is between 3 and 50 milliamps, this input will be read as logic “0”. All the input associated with all open switches will be read as logic “1”. ©Sealevel Systems, Inc. DIO-16.LCPI Manual...
- Page 24 The above diagram shows the common path to all the relays is provided external to the connector. The common path can be provided at the connector as shown in the DB-44 diagram above. For complete electrical isolation, each relay can be wired to an independent isolated circuit. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 25 Rated Life: Maximum Load 100 Million Closures Contact Speed: Operate .5mS Contact Speed: Release .2mS Contact Speed: Bounce .5mS Max Operating Speed 600 Hz Width Length (Including Gold fingers) 4.7” 2.5” (12.0 cm) (6.4 cm) ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 26 Non-Condensing Non-Condensing +5VDC @ 280mA +12VDC (optional) All Sealevel Systems printed circuit boards are built to UL 94V0 rating and are 100% electrically tested. These printed circuit boards are solder mask over bare copper. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 27 4. Right click on the listed adapter and choose „Uninstall‟. 5. Click on „Actions‟ and choose „Scan for hardware changes‟. 6. This will prompt the PC to scan and locate the Sealevel I/O adapter and properly initiate the installation and driver association.
- Page 28 1. With the system powered down, verify the I/O adapter is seated properly into the slot. 2. Sealevel ISA and PCI Digital I/O adapters require 5V on the bus from the power supply. 3. Sealevel Universal PCI Digital I/O adapters are 3.3V signal compliant. The I/O adapter requires 5V on the bus for proper operation.
- Page 29 4. If hardware installation issues persist, remove other bus level devices from your system to verify if this corrects the problem. Once your Sealevel Software is installed, verify the I/O adapter is properly enumerated. Navigate to the Device Manager for verification and configuration.
- Page 30 These three utilities were designed to verify the functionality of your Sealevel digital I/O adapters. To access these utilities navigate to: Start – All Programs – SeaIO. This utility allows the setting and clearing of individual relays and groups of relays. It also offers timed activation of relays and monitoring of input signals.
- Page 31 SeaIO driver configuration and hardware adapter settings. A main menu offers choices for reading and writing ports, and setting and clearing relays. This utility also demonstrates the use of the NotifyInputChange API call. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 32 This is an example of a properly enumerated SeaI/O digital I/O adapter in Windows Device Manager. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 33 This verifies that the SeaI/O digital I/O adapter (8004) is correctly enumerated. To properly configure your digital I/O adapter, please click on the „Card Setup‟ tab and refer to the Configuration section of this manual. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 34 The period of time (in microseconds) that occurs between passes of the driver looking at the inputs is specified in the Sample Interval box. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 35 If the input threshold voltage has been met the API returns a 0. Outputs: If a 0 is written to the port the relay is energized. If a 1 is written to the port the relay is de- energized. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 36 Additional information for Positive and Negative logic choices can be located in the SeaIO Software Information Help file found here: Start – All Programs – SeaIO – SeaIO Help - Logic States. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 37 6. Keep work area free of non-conductive materials such as ordinary plastic assembly aids and Styrofoam. 7. Use field service tools such as cutters, screwdrivers, and vacuum cleaners that are conductive. ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 38 ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 39 ©Sealevel Systems, Inc. DIO-16.LCPI Manual SL9018 – 03/2011...
- Page 40 When calling for technical assistance, please have the device installed and ready to run diagnostics. If possible, have your user manual and current settings ready. The Sealevel website is an excellent resource located at www.sealevel.com. The most current software updates and user manuals are available via our homepage by clicking on the 'Drivers' or 'Manuals' links located under „Technical Support.‟...
- Page 41 We are able to offer this warranty due to our control of manufacturing quality and the historically high reliability of our products in the field. Sealevel products are designed and manufactured at its Liberty, South Carolina facility, allowing direct control over product development, production, burn-in and testing.