HEAT mode(Valid only for heat pump units)
Press the
MODE
●
"
"
FAN
key to select different speed.
AUTO mode(Valid only for heat pump units)
"
"
Press the
MODE
●
temperature . Press the FAN key to select different fan speed. The plenum will display
and "
"
FURNACE mode
This function is available in heat pump & furnace model only. Press the " FURNACE key to activate furnace as primary
●
heating and the buzzer sounds once. Heat pump operation will stop. Press the same key again to disable this overriding
function and the buzzer will sound twice.
Celsius and Fahrenheit degree change
●
"
"
mode. Press the up ▲
key, select the
The plenum will display
"
"
key, select the
mode. Press the up
key to increase the set point temperature. Press the
"
"
room
"
"
or down
22
3 seconds
"
"
key to adjust the set point
"
"
"
"
and
"
"
"
or