Houghton BELAIRE A3501 Owner's Manual page 11

Install outdoor unit
Place the outdoor unit over the outlet gasket (
●
outdoor unit without the sealing gasket). Place the
the hole in the roof (The outdoor
outdoor unit over
unit with the sealing gasket).
make sure the 4 bolts under the outdoor unit are
aligned with the 4 corners of the square hole
(360 360mm/14 3/16" 14 3/16 ).When the position
×
of outdoor unit is being adjusted a person needs
to go to the inside of caravan to ensure the
alignment remains accurate .
Do not push or pull the outdoor unit while it is
●
resting on the gasket. Lift and align the unit before
resting it back on the gasket. Sliding the unit across the
gasket may cause damage to the outlet gasket and
lead to leakage of air and water.
The 4 holes which receives the M8 bolts on the base
●
of the outdoor unit should align with the 4 corners of
the square hole (360 360mm
×
the roof.
View from underside when correctly
positioned and aligned
Adjust position to
× "
/14 3/16"×14 3/16"
Non-ducted Air Conditioning System:
(Ducted Air Conditioning System-Skip To P11)
The
Install
Cut the
the outdoor
head screws(#10).
) on
8
outlet air duct
4 cable ties and fix the outlet air duct(#3) to
unit from inside of caravan using 4 truss
Note
The outlet air duct has the up and
down , left and right
directions marked.
There is only one way to connect the duct
correctly.
Truss head screw
This face down