Termination Panels For Fps - Nortel 15000 Hardware Description

Termination panels for FPs

The termination panels available for a Nortel Networks Multiservice
Switch 15000 or Multiservice Switch 20000 node include fanout panels and
sparing panels. These termination panels interconnect equipment to the
function processors (FPs) installed in the node.
When a NEBS 2000 frame or equivalent mounting apparatus houses a single
Multiservice Switch, termination panels can be attached to the empty portion
of the mounting apparatus. In frames containing two nodes, a separate
mounting apparatus is required. The 19-inch wide sparing panels that are
used with Multiservice Switch FPs can be mounted to a NEBS 2000 frame
using the adapter brackets from kit NTHW14.
The type of cable and connector that is available as prefabricated cable
assemblies and the cable specifications that are required to custom make
your own are provided in the description of each FP that uses the panel. FP
descriptions are in
The installation of each termination panel and its cables can be found in
NN10600-130 Nortel Networks Multiservice Switch 15000/20000 Hardware
Installation, Maintenance, and Upgrade.
The replacement of each termination panel or one of its cables can be found
in NN10600-130 Nortel Networks Multiservice Switch 15000/20000 Hardware
Installation, Maintenance, and Upgrade.
Navigation
• Basic functionality and operation of a sparing panel (page 243)
• Basic functionality and operation of a fanout panel (page 246)
• 12-port DS3 or E3 fanout panel NTHW52 (page 248)
• 12-port DS3 or E3 sparing panel NTQS31 (page 251)
• 4-port DS3 sparing panel NTHR79 (page 254)
• 3-port DS3, E3, or E1 sparing panel NTFP99AA (page 256)
• Multiport aggregate device for a 32-port E1 TDM (page 258)
Copyright © 2005, Nortel Networks
Control and function processors (page
Nortel Networks Multiservice Switch 15000/20000
Hardware Description
NN10600-120 sPCR6.1S1 Standard
sPCR6.1 February 2005
114).
Nortel Networks Confidential