Sfp Modules For An Nthw49 - Nortel 15000 Hardware Description

SFP modules for an NTHW49

More than one version of small-form pluggable (SFP) modules can be used
per NTHW49 FP. The type of fiber cable must match the version of module,
and all modules interface with small-form LC connectors.
The PEC versions of SFP modules that can be used with the NTHW49 are:
• NTTP01AB, 1000BASE-SX for multimode (MM) fiber cables for short
reach (SR) up to 0.55 km (0.31 mi) when using 50/125 fiber or up to
0.275 km (0.17 mi) when using 62.5/125 fiber, and with a nominal
wavelength of 850 nm
• NTTP01CB, 1000BASE-LX for single-mode (SM) fiber cables for
intermediate reach (IR) up to 10 km (6.25 mi) and with a nominal
wavelength of 1310 nm
The general description and purpose of SFPs is in
(page
Copyright © 2005, Nortel Networks
- 175 -
Control and function processors
239).
Nortel Networks Multiservice Switch 15000/20000
Hardware Description
NN10600-120 sPCR6.1S1 Standard
sPCR6.1 February 2005
SFP optical modules
Nortel Networks Confidential