Edgelink 100 - Nortel 15000 Hardware Description

Connecting a Multiservice Switch 15000 or Multiservice Switch 20000
node to an EdgeLink 100
Before installing the interface cables and connecting them, the EdgeLink 100
multiplexor must be mounted, and the Nortel Networks Multiservice Switch
node DS3 function processor (FP) with BNC connectors must already be
installed. The part number of the mux is NTPV02. For the installation of an
EdgeLink 100, refer to
document EdgeLink 100 Digital Multiplexer General Description, section 825-
102-001.
The EdgeLink interfaces to a DS3 function processor (FP) with BNC
connectors mounted in a Nortel Networks Multiservice Switch 15000 or
Multiservice Switch 20000 node, and to an RJ48 termination access panel.
The RJ48 connections are either:
• 64-pin Cinch or wirewrap to an RJ48 T1 access panel with monitor jacks
(part number A0718812)
• 64-pin Cinch or wirewrap to an RJ48 T1 access panel (part number
A0718813)
The interface cables that connect an EdgeLink 100 to the Multiservice Switch
node or Ethernet hub of a Multiservice Data Manager workstation are listed in
the table
Switch 20000 nodes and an EdgeLink 100 (page
required, one for transmitting and one for receiving.
Interface cables between Multiservice Switch 15000 or Multiservice Switch 20000 nodes and an

EdgeLink 100

Type and Part number
quantity
DS1, A0718801, Telco
two Systems' AWX432G5
DS1, A0718802, Telco
two Systems' AWX432G15
DS1, A0718803, Telco
two Systems' AWX432G30
DS1, A0718779, Telco
set of two Systems' AXX432G5
DS1, A0718780, Telco
set of two Systems' AXX432G25
Copyright © 2005, Nortel Networks
- 117 -
Control and function processors
Telco Systems
Interface cables between Multiservice Switch 15000 or Multiservice
Length Type of connector at
EdgeLink
1.5 m 90-degree male 64-pin to
(5 ft) 64-pin Amphenol/Cinch
4.6 m 90-degree male 64-pin to
(15 ft) 64-pin Amphenol/Cinch
9.1 m 90-degree male 64-pin to
(30 ft) 64-pin Amphenol/Cinch
1.5 m 90-degree male 64-pin
(5 ft) Amphenol/Cinch to
wirewrap
7.6 m 90-degree male 64-pin
(25 ft) Amphenol/Cinch to
wirewrap
(1 of 2)
Nortel Networks Multiservice Switch 15000/20000
Hardware Description
NN10600-120 sPCR6.1S1 Standard
sPCR6.1 February 2005
' documentation, starting with the
117). Two cables are
Type of connector at
other end
RJ-48 termination
or wirewrap
RJ-48 termination
or wirewrap
RJ-48 termination
or wirewrap
wirewrap at RJ-48
termination
wirewrap at RJ-48
termination
Nortel Networks Confidential