32-Port E1 Tdm Cable Assemblies - Nortel 15000 Hardware Description

Refer to
and capabilities of the types of panels.
The connections can be made to equivalent non-Nortel Networks equipment
provided the cabling criteria are met.

32-port E1 TDM cable assemblies

The maximum cable length for lines between the FP and the multiport
aggregate device is 350 m (1150 ft). The distance between the FP and the
sparing panel is part of the total length. The insertion loss of a cable must not
exceed 12 dB measured at 17184 kHz.
The table
available prefabricated cables. The cable assemblies with standard male BNC
connectors at both ends can be connected to either another FP, the
NTFP99AA sparing panel, the NTHW52 fanout panel, or other compatible
equipment.
Cable assemblies for a 32-port TDM FP
PEC
NTFP19AD
NTFP19AE
NTHR69
NTHR70
NTHR71
When a prefabricated interface cable from Nortel Networks is connected
between a E1 FP and a Nortel Networks termination panel, the connection is
grounded.
You can custom make your own traffic port cables to connect the FP to the
other end connections by using the specifications in the table
parts for a 32-port E1 TDM FP (page
in the figure
Copyright © 2005, Nortel Networks
- 162 -
Control and function processors
Termination panels for FPs (page 242)
Cable assemblies for a 32-port TDM FP (page 162)
Description
male straight BNC to male straight BNC
male straight BNC to male straight BNC
DB9 sparing control port
DB9 sparing control port
DB9 sparing control port
Faceplate of a 32-port E1 TDM with PEC NTHW92 (page
Nortel Networks Multiservice Switch 15000/20000
Hardware Description
NN10600-120 sPCR6.1S1 Standard
sPCR6.1 February 2005
for the description, function,
163). The port connections are identified
Nortel Networks Confidential
lists the
Length
3.0 m (9.8 ft)
15 m (49 ft)
2.5 m (8 ft)
5 m (16 ft)
15 m (49 ft)
Cable assembly
161).