Water Connection - Toshiba DWS-34AHK Instruction Manual

Grounding Instructions
This appliance must be earthed. In the event of a malfunction or breakdown, earthing will reduce the
risk of electric shock by providing a path of least resistance for the electric current. This appliance is
equipped with a cord having an equipment-earthing conductor and an earthing plug. The plug must
be plugged into an appropriate outlet that is installed and earthed in accordance with all local standards
and requirements.

Water connection

Connect the cold water supply hose to a threaded 3/4(inch) connector and make
sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time,
water run to make sure that the water is clear. This precaution is needed
let the
to avoid the risk of
Inlet pipe
Clean the filter device of the water inlet pipe
There is a filtering system , which is located between the end of the water inlet
pipe and the faucet, can remove impurities in the water. Over time, more and
more impurities may clog pipe. Therefore, it is recommended to check the
status every month, remove the filter from the water inlet pipe by using a plier
and clean impurities with running water when necessary.
the water inlet to be blocked and damage the appliance.
Drain Pipe
Power cord
Water Inlet
29