Power Connection; Water Connection - Toshiba DW-14F1ME(W)-IQ Instruction Manual

Warning

Power connection

Warning
Electric Shock
Do not use an extension cord or power adapter on this machine.
In case, do not cut off or remove the grounding connection of power cord.
Power requirements
Please check the label of rated value of power supply system for knowing rated voltage and
connect the machine to appropriate power supply. 10A fuse is required and time-delay
fuse or circuit breaker is recommended. Only separate circuit is suitable for this machine.
Machine connection
Make sure that supplied voltage and frequency correspond to those on rating plate. Plug
can only be connected to a properly grounded socket. If the socket that the machine must
be connected to is not suitable for the plug, replace the socket, and do not use a power
adapter that may cause overheating and burning.

Water connection

Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that
it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the risk of
the water inlet to be blocked and damage the appliance.
30
Electric Shock
The machine shall be installed after the power is off. If not, electric shock
or death can be caused.
Please make sure the machine is properly grounded before use.