Installation
Warning
Preparation before installation
The machine shall be installed close to existing water tap, outlets and socket.
It should be close to drain to facilitate connection of drainage pipe.
Where to place
The back of the machine shall be against the wall and for lateral connection,
it shall be arranged along adjacent cabinet or wall.
The machine is equipped with a drainage pipe, which allows to be positioned on
the left or right side for easy installation. In addition, you may use a water supply
pipe other than adding water to the tank. For details, please contact your agent.
Power connection
Warning
Electric Shock
Do not use an extension cord or power adapter on this machine.
Power requirements
Please check the label of rated value of power supply system for knowing rated voltage and connect
the machine to appropriate power supply. 10A fuse is required and time-delay fuse or circuit breaker
is recommended. Only separate circuit is suitable for this machine.
Machine connection
Make sure that supplied voltage and frequency correspond to those on rating plate. Plug can only be
connected to a properly grounded socket. If the socket that the machine must be connected to is not
suitable for the plug, replace the socket, and do not use a power adapter that may cause overheating
and burning.
24
Electric Shock
or death can be caused.
Please make sure the machine is properly grounded before use.