Table of Contents
Advertisement
Put
additional
Additional dishes can be placed in at any time before dishwasher program start. If you
want to reload dishes in the process of washing, please follow instructions below:
1. Press "Start/Pause" button to pause washing program;
2. Wait for 5 seconds to open the door;
3. Put the additional dishes in;
4. Close the door;
5. Press "Start/Pause" button and after 10 seconds, the dishwasher will start again.
After 5 seconds
End of washing program
After the program finishes, the machine show"End"and the buzzer beeps for 8
seconds. If you want to stop the machine immediately, press ON/OFF button.
Then, wait a few minutes to avoid burns before open the door and clear the
dishwasher. Be careful of hot dishes.
Open the door carefully
Hot dishes are more likely to be damaged. The dishes shall be cool for about 15 minutes and then
taken out from the dishwasher.
Clear the dishwasher
It is normal that the dishwasher still remains wet inside.
Warning
It is extremely dangerous to open the door in
burn by hot water.
Forced drainage operation
In standby mode, you can press and hold "Delay start“ button + "WIFI“ button
simultaneously for 3 seconds to drain the water tank.
24
dishes in
dishwasher.
h t
e
p
o r
e c
s s
f o
w
a
h s
n i
g
s a
h t
s i
m
y a
c
u a
e s
e s
e v
e r
Advertisement
Table of Contents
