Water Connection; Connection Of Drain Hoses - Toshiba DW-14F2MESS Instruction Manual

lfthere is no grounding in your place, the power
cord with air switch will make a protection. When
users touch the shell with electricity of the
appliance, it will cut the power immediately to
protect from constant electric shock.
When power supply safely, the indicator(A) lights
up. If the electric shock happens, the switch(B) will
eject. After the problem has been solved, please
press the switch(B) to reset.
For your safty and proper operation of the
appliance, make sure the appliance is grounded.
Water connection
Connect the cold water supply hose to a threaded 3/4{inch) connector and make sure that
it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the risk of
the water inlet to be blocked and damage the appliance.
Connection of drain hoses
Insert the drain hose into a drain pipe with a minimum diameter of 4 cm, or let it run into
the sink, making sure to avoid bending or crimping it. The height of drain pipe must be less
than 1000mm. The free end of the hose must not be immersed in water to avoid the back
flow of it.
A
Please securely fix the drain hose in either position A or position B
=i===========~===::::;:======;::: ~
Counter
Back of dishwasher
Drain hose
E
E
0
0
0
Water Inlet
IJ1I1=4:=4:~ © ;!;~ ~ . H -----t
Drain Pipe
I
cj)
40mm
Mains Cable
31