Part 7: Cleaning And Care - Philco PSL 40F CUBE Owner's Manual

Switching off your appliance
If the appliance needs to be switched off for an extended period the following steps should be taken prevent
mould on the appliance.
1. Remove all food.
2. Remove the power plug from the mains socket.
3. Clean and dry the interior thoroughly.
4. Ensure that all the doors are wedged open slightly to allow air to circulate.

PART 7: CLEANING AND CARE

Warning! Risk of electric shock!
The appliance must not be connected to the mains during cleaning. There is a risk of electric shock! Turn the
appliance off and disconnect the power cable plug from the electric outlet before cleaning.
Warning!
• Do not use sharp objects for cleaning as they could scratch the surface of the appliance.
• Do not use thinners, car cleaning agents, Clorox, etheric oils, abrasive cleaning agents or organic solvents
such as benzene for cleaning. They could damage the surface of the appliance and cause fire.
• TURN THE APPLIANCE OFF AND DISCONNECT THE POWER CABLE PLUG FROM THE ELECTRIC OUTLET
BEFORE PERFORMING MAINTENANCE.
• DO NOT CLEAN THE APPLIANCE USING METAL OBJECTS, STEAM CLEANERS, ETHERIC OILS, ORGANIC
SOLVENTS OR ABRASIVE CLEANING AGENTS.
• DO NOT USE SHARP OBJECTS TO REMOVE FROST FROM THE APPLIANCE. USE A PLASTIC SCRAPER.
When leaving the cooling appliance empty for a long period of time, it must be turned off, defrosted,
cleaned, dried and its door must be kept open to prevent mold formation inside the appliance.
Warning!
Do not use sharp objects to remove frost from the inside of the freezer. Only after the inside of the appliance
is completely dry should the appliance be turned on again and reconnected to the electrical outlet.
Copyright © 2020, Fast ČR, a. s.
EN - 19
Revision 04/2022