Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd
Chapter X Upgrade firmware
The E610 module supports serial port firmware upgrade. If you need special after-sales support, contact us
to obtain the firmware for upgrade。
Upgrade mode 1: Use the TTL to USB tool to connect the VCC/TX/RX/GND module and control the M0/M1 level to
enter configuration mode. Select the Firmware Upgrade TAB in the configuration tool of the official website, click
the "Open File" button to select the firmware, then click Start download, and wait until the progress bar is 100%.
Upgrade mode 2: The module is powered off first, and then powered on after short-connecting AUX and GND pins
of the module (maintain short-connecting for at least one second before releasing). The module automatically
enters the upgrade mode, and then download the firmware using the configuration tool.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd
22
E610-433T30S User Manual
Advertisement
Table of Contents
