Chapter Xii Faq; The Transmission Distance Is Not Ideal; Module Damage; The Bit Error Rate Is Too High - Ebyte E610-433T30S User Manual

433mhz 1w wireless high-speed connection module
Hide thumbs Also See for E610-433T30S:
Table of Contents

Advertisement

Chengdu Ebyte Electronic Technology Co.,Ltd

Chapter XII FAQ

12.1 The transmission distance is not ideal

When linear communication obstacles, communication distance will be the corresponding attenuation;
Temperature, humidity, same frequency interference, can lead to communication packet loss rate increase;
The ground absorption and reflection the radio waves, near ground test effect is poorer;
Seawater has a strong ability to absorb the radio waves, so the test effect is poor;
Near the antenna with metal objects, or placed in a metal casing, the signal attenuation is very severe;
Power register setting error, air rate set too high, the higher the air velocity, the closer distance);
Power low voltage is lower than the recommended value at room temperature, the lower the voltage to send power
is smaller;
The matching degree between antenna and module is poor or the quality of antenna itself is wrong.

12.2 Module damage

Please check the power supply, ensure the recommended between the power supply voltage, such as more than
the maximum value will cause the module permanent damage.
Please check the power supply stability and voltage cannot significantly fluctuate frequently;
Please ensure installation using anti-static operation, high frequency devices electrostatic sensitivity,
Humidity shoulds not be too high, please ensure that the installation process of components for humidity sensitive
device;
It is not recommended to use at high or low temperature if there is no special requirement.

12.3 The bit error rate is too high

Near the same frequency interference, away from the interference sources or change frequency, channels to avoid
interference;
Power not ideal also may cause garbled, be sure to guarantee the reliability of the power supply;
Extension wire, feeder quality is poor or too long, will also cause high bit error rate.
Copyright ©2012–2022,Chengdu Ebyte Electronic Technology Co.,Ltd
24
E610-433T30S User Manual

Advertisement

Table of Contents
loading

Table of Contents