Decommissioning; Disassembling The Sunny Boy; Packaging The Sunny Boy; Storing The Sunny Boy - SMA Sunny Boy 1100 Installation Manual

Decommissioning

10 Decommissioning
10.1 Disassembling the Sunny Boy
CAUTION!
Risk of injury due to the heavy weight of the Sunny Boy!
• Take the Sunny Boy's weight of approximately 25 kg into account.
1. Open the Sunny Boy as described in section 7.1 „Opening the Sunny Boy" (31).
2. Remove all cables from the Sunny Boy.
3. Close the Sunny Boy: fasten the housing cover to the Sunny Boy with the 4 screws.
4. Disassemble the Sunny Boy.
10.2 Packaging the Sunny Boy
If possible, always package the Sunny Boy in the original packaging. If this is no longer available,
you can also use an equivalent box that fulfills the following requirements:
• suitable for loads up to 25 kg
• with handle system
• can be closed fully
10.3 Storing the Sunny Boy
Store the Sunny Boy in a dry place where ambient temperatures are always between
-25 °C and +60 °C.
10.4 Disposing of the Sunny Boy
Dispose of the Sunny Boy at the end of its service life in accordance with the disposal regulations for
electronic waste which apply at the installation site at that time. Alternatively, send it back to SMA
Solar Technology with shipping paid by sender, and labeled "ZUR ENTSORGUNG" ("for disposal").
38 SB11_17-IEN084820
SMA Solar Technology AG
Installation Guide