Table of Contents
Advertisement
TrakMax 30L User Manual
Revision 1.0
LED
PV
BAT
CHARGE
FAULT
4.4 B
D
UTTON
EFINITIONS
Button
4.5 LCD G
RAPHIC
LCD Symbol
Page 18 of 29
PV input voltage present
BATTERY voltage present
CHARGING in process
FAULT or abnormality present
Name
Description
Enter into current parameter setting state. Once in provisioning
ENTER
mode, the parameter will blink. Once finished, press ENTER
again to save parameter settings.
Cycle interface settings to next available interface.
UP
Positive (+) parameter adjustments to modify parameter values.
Cycle interface settings to previous available interface.
DOWN
Negative (-) parameter adjustments to modify parameter values.
Escape interface setting without saving the current parameters
BACK
and return to MAIN page
I
NDICATORS
Description
PV – Solar Panel Array Symbol.
BATTERY Symbol.
Each cell corresponds to 20% of the battery capacity.
Capacity is calculated based on 100% of full voltage.
LOAD Symbol
windynation
ON
OFF
No input PV voltage
No BATTERY voltage
No CHARGING
Normal Operation
05/06/2015
Advertisement
Table of Contents
