Using Ibm Lan Support Program Drivers - 3Com PC CARD ADAPTER User Manual

17 Immediately following the line DRIVERNAME=TLPC3$,
include the text from the PROTOCOL.PCM file.
For example, if you are using Card Services, the statements
should look similar to the following:
[TLPC3]
Or, if you are not using Card Services, the statements should
look similar to the following:
[TLPC3]
18 Save the file and exit.
This completes the procedure that imports the driver during
installation of Windows for Workgroups.

Using IBM LAN Support Program Drivers

You can install IBM LAN Support Program (LSP) drivers with
the 3C689 adapter. IBM's LSP drivers do not have any
embedded support to initialize PC Card adapters.
3Com provides an enabler program that works with the
protocol manager to initialize the PC Card adapter. You must
load the enabler program and protocol manager before
loading the IBM LSP drivers. The LANSUP subdirectory of the
TokenDisk diskette contains the enabler program
(LSPEN.3CM), the protocol manager (PROTMAN.DOS), and
installation instructions (LANSUP.TXT).
DRIVERNAME=TLPC3$
RINGSPEED=16
DRIVERNAME=TLPC3$
PRIMARY
INTERRUPT=3
MMIO=0XCC00
RAM=0XD000
RAMSIZE=16
RINGSPEED=16
Installing the NDIS 2.01 Driver 5-11