Saving Settings To Use For Installing Other Adapters - 3Com PC CARD ADAPTER User Manual

4-6 C
HAPTER
4 Use the arrow keys to scroll through the list of valid
settings for each parameter. To select a setting,
press [Enter].
Press [F1] for information about the settings.
5 Continue this procedure with any other parameters that
you want to change.
6 To save the new settings to the NET.PCM and the
PROTOCOL.PCM files, press [Tab] to highlight <OK>.
Press [Enter].
This completes the parameter changes for the selected
setting(s). The next step is to install the network drivers.
See Chapter 5.

Saving Settings to Use for Installing Other Adapters

If you want to use the same settings on other adapters, you
can save the configuration settings to a .SET file stored on
the copy of the TokenDisk diskette. To save the settings,
follow these steps:
1 Complete steps 1–5 in the previous procedure.
2 Select Save under the <File Options> command button in
the Adapter Configuration dialog box.
3 Use the arrow keys to select the directory where you
want to save the file.
4 Press [Enter].
This saves the settings to the selected directory.
4: S I
TANDARD NSTALLATION AND
C
ONFIGURATION