Removing The Adapter - 3Com PC CARD ADAPTER User Manual

16/4 pc card adapter

Hide thumbs Also See for PC CARD ADAPTER:

Table of Contents

2-6

HAPTER

Once you have inserted and connected the 3C689 adapter to

the network, you are ready to conﬁgure the adapter. To

conﬁgure the 3C689 adapter, go to Chapter 3 if you are on a

DOS-based Novell

any other network operating system, go to Chapter 4.

Removing the Adapter

The adapter can be removed whether the power to the

computer is ON or OFF.

Be sure to log off the network before you remove the

3C689 adapter.

Follow these steps to remove the adapter:

1 Disconnect the connecting cable from the network.

2 Slide the latch on the PC Card connector back to

disconnect the connecting cable from the 3C689 adapter.

Do not use the cable to pull the adapter out of the slot.

3 Remove the adapter from your computer.

You can remove and reinsert the adapter without rebooting

the computer.

4 Store the adapter card in its original or similar packaging.

2: I

3C689 A

NSTALLING THE

DAPTER

NetWare

network. If you are running

Table of Contents

Do you have a question about the PC CARD ADAPTER and is the answer not in the manual?

Tokenlink iii 3c689