3C689 Adapter Features; 3C689 Adapter Requirements - 3Com PC CARD ADAPTER User Manual

1-2 C
HAPTER

3C689 Adapter Features

The 3C689 adapter ships with an unshielded twisted-pair
(UTP) cable and a shielded twisted-pair (STP) connector.
The 3C689 adapter features include:
Automatic adapter configuration.
Compliance with IEEE 802.5 standards.
100% IBM
Compliance with PCMCIA Release 2.01 standard, Type II form
factor.
Integrated Card Services support (also works without
Card Services).
"Hot Swap" support (you can remove and reinsert the
adapter without rebooting the computer).
The TokenDisk
includes the AutoLink
Configuration and Diagnostic Program, DOS and OS/2 drivers,
and driver agents for Transcend PC Link SmartAgent software.

3C689 Adapter Requirements

Before you can install the adapter successfully, you must
meet the following requirements:
Your computer must have the PCMCIA Release 2.01, 16-bit
Type II or Type III card slot and a 3 1/2-inch diskette drive.
Your computer must be running DOS 3.1 or higher.
Your computer must have an 80286 or higher processor.
You must be physically connected to a UTP or
STP network port.
1: I
NTRODUCTION
â
compatibility (uses IBM-designed chip set).
â
diskette is supplied with the adapter. It
ä
automatic installation program, the