Power Management; Modeling Lamp - Godox AD300Pro User Manual

Battery Level
Indication on the VA
panel
3 grids
2 grids
1 grid
Blank grid
Blinking

Power Management

ON/OFF Power Switch controls the on/off of the flash unit, turn off the power pack if the
flash unit will not be used for an extended period. The product design of power supply
with automatic hibernation feature. When unattended operation for a long time
(approx. 30/60/90 minutes), the flash will automatically standby.
Disable Auto Power standby function is recommended when the flash is
used of camera. (C.Fn-F3, Page 39)

Modeling Lamp

1. Power on/off the modelling lamp: short press the < > to control the modeling
lamp's on or off.
2. Setting: long press the < > to enter modeling lamp setting.
Brightness setting: Press the SET button and the brightness value is blinking. Turn
the select dial to change the brightness value from 1 to 10 level.
Color temperature setting: press the SET button and the color temperature value
is blinking. Turn the select dial to change to color temperature value from 300K
to 600K (±500K)
Meaning
Full battery
Medium battery
Low battery
Lower battery, please recharge it
The battery level is going to be used out immediately. And
the flash will auto power off in 1 minute.
Note: Please recharge the battery as soon s possible (within
10 days). Then, the battery can be used or be placed for
long period.
13