Flash Mode - M: Manual Flash - Godox AD300Pro User Manual

Flash Mode – M: Manual Flash
The flash output is adjustable from 1/1 full power to 1/256
step increments. To obtain a correct flash exposure, use a hand-held flash meter to
determine the required flash output.
Press <MODE> button so that <M> is
displayed.
Optic S1 Secondary Unit Setting
In M manual flash mode, press the <MENU> button to enter C.FN-F2 to choose S1
function, so that this flash can function as an optic S1 secondary flash with optic sensor.
With this function, the flash will fire synchronously when the main flash fires, the same
effect as that by the use of radio triggers. This helps create multiple lighting effects.
Optic S2 Secondary Unit Setting
Press the <MENU> button to enter. C.FN-F2 to choose S2 function, so that this flash can
also function as an optic S2 secondary flash with optic sensor in M manual flash mode.
This is useful when cameras have pre-flash function. With this function, the flash will
ignore a single "pre-flash" from the main flash and will only fire in response to the
second, actual flash from the main unit.
S1 and S2 optic triggering is only available in M manual flash mode.
th power in 1/10
Turn the Select Dial or press the SET
button and turn the Select Dial
simultaneously to set the flash output.
The flash output will be adjustable from
th
1/10 increasment or 1 step increasment
by turning the Select Dial directly or
pressing the SET button and turn the
Select Dial simultaneously.
15
th step or 1