Stop using this product if it breaks open due to extrusion, falling or strong hit. Otherwise, AD300Pro Outdoor Flash has strong power with light weight, compact size and great portability. electric shock may occur if you touch the electronic parts inside it.
Contents Foreword Warning Name of Parts Body VA Panel Included Accessories Separately Sold Accessories Replacing Adapter Rings and Accessories Attaching and Detaching Flash Tube Battery Power Management Modeling Lamp Wireless Flash Mode Flash Mode— TTL Autoflash TTL Mode High-Speed Sync Flash Mode—M: Manual Flash Flash Mode—Multi/Stroboscopic Flash Wireless Flash Shooting: Radio (2.4G) Transmission...
Name of Parts Name of Parts Body: 1/4'’ Mounting Hole Reflector Locking Light Sensor Button Reflector Display Screen Light Body Radiator 3.5mm Sync Cord Jack LED Light Type-C USB Firmware Upgrade Port Flash Tube Glass Protection Cover Locking Button MODE Mode Selection Button GR/CH Group/Channel Button MENU Button Wireless/High-speed...
Tighten the four screws. Install the accessories of different mounts. If needed to use new Godox-mount accessories Make sure the battery pack is securely loaded in the flash. Check the battery level after installing the adapter ring of other brand , indication on the VA panel to see the remaining battery level.
● Over-temperature protection may be activated after 20 consecutive high-speed sync 3000K to 6000K(±500K). flashes. Wireless Flash Mode AD300Pro can only be set as slave unit (receiver end). Short press the wireless selection button to switch the radio transmission function. Flash Mode — M: Manual Flash Wireless Mode...
Flash Mode — Multi: Stroboscopic Flash Optic S1 Secondary Unit Setting In M manual flash mode, press the <MENU> button to enter C.FN-F2 to choose S1 function, so that this flash can function as an optic S1 secondary flash with optic sensor. With stroboscopic flash, a rapid series of flashes is fired.
3. Setting the Communication Group Short press the < GR/CH > button to choose group ID from A to E. When using the AD300Pro and Godox X2 series trigger together,the X2 can control the flash function such as: ● Flash Mode: TTL, M, Multi ●...
1. Press the <MENU> button to enter the C.Fn meun. The Reason & Solution of Not Triggering in Godox 2.4G Wireless 2. Select the custom function No. ● Turn the SET Selection Dial to select the custom function No. 1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base station, 2.4G wifi router, 3.
Protection Function Technical Data 1. Over-Temperature Protection Model AD300Pro Wireless Slave Unit Mode Radio transmission mode (compatible with Nikon & Canon & ● To Avoid overheating and deteriorating the flash head, the inner over-temperature Sony& Fujifilm & Olympus & Panasonic & Pentax ) protection function will be activated.
USB socket.Type-C USB connection line is applicable. two conditions: (1) This device may not cause harmful interference, and (2) this device ● As the firmware upgrade needs the support of Godox G3 software, please must accept any interference received, including interference that may cause undesired download and install the "Godox G3 firmware upgrade software"...
Need help?
Do you have a question about the AD300Pro and is the answer not in the manual?
Questions and answers