DeWalt DW073 Instruction Manual page 19

DW073/611118-01 5/13/02 4:37 PM
• You should see a single red line on a vertical surface. If you see
a double line, have your Rotary Laser calibrated by a D
service center.
• Turn unit on so that the lasers are on but NOT rotating.
• Using the Manual Rotation Button, rotate the head so that the lasers
appear as two dots on a vertical surface about 25 feet away.
• Compare the vertical position of the center of each laser beam.
The centers should be within 3/32"(vertically) of each other.
• If the centers of the two beams differ by more than 3/32" (vertically),
then have your Rotary Laser calibrated at a D
PLUMB ERROR CHECK
• Set up a tripod about 25 feet from a vertical surface.
• Mount your Rotary Laser on the tripod.
• Following the procedure in the "Two Position Pivoting Head" section
of this manual, set the Rotary Laser head in the plumb position.
• Hang a plumb bob from the vertical surface.
• Level the laser, following instructions in the "Vertical Plumbing"
section of this manual.
• Turn the unit on so that the lasers are on and rotating.
• Rotate the laser on the tripod so that the beam is in the line with
the plumb bob.
• Ensure that the laser is still level.
• If the beam lies along the same line as the plumb bob string, then
the calibration is acceptable.
• If the beam does not lie along the same line as the plumb bob string,
have your Rotary Laser calibrated at a D
Accessories
Recommended accessories for use with your tool are available at extra
cost from your local service center.
CAUTION: The use of any non-recommended accessory may be
hazardous. If you need any assistance in locating any accessory,
Page 15
WALT
E
WALT service center.
E
WALT service center.
E
17
please contact D WALT Industrial Tool Co., 701 East Joppa Road,
E
Baltimore, MD 21286 or call 1-800-4-D
our catalog on the World Wide Web at www.DEWALT.com.
Important
To assure product SAFETY and RELIABILITY, repairs, maintenance
and adjustment should be performed by certified service centers or
other qualified service organizations, always using identical replace-
ment parts.
Full One Year Warranty
D WALT heavy duty industrial tools are warranted for one year from
E
date of purchase. We will repair, without charge, any defects due to
faulty materials or workmanship. For warranty repair information,
call 1-800-4-D WALT. This warranty does not apply to accessories or
E
damage caused where repairs have been made or attempted by
others. This warranty gives you specific legal rights and you may
have other rights which vary in certain states or provinces.
In addition to the warranty, D WALT tools are covered by our:
E
30 DAY NO RISK SATISFACTION GUARANTEE
If you are not completely satisfied with the performance of your
D WALT heavy duty industrial tool, simply return it to the participating
E
seller within 30 days for a full refund. Please return the complete unit,
transportation prepaid. Proof of purchase may be required.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
WALT. (1-800-433-9258) See
E