Epson Gemini User Manual page 98

Follow the steps in this section to print the necessary test charts, as
outlined in the table below. (You are not billed for these prints.)
Test chart type
Gemini Profile Chart 288 1 from each printer on Matte
Gemini Color Check
Sheet
Gemini Color Chart 288
Alignment Check Pattern 1 from each printer on Luster
Image Quality
Adjustment
1. On the Gemini EPPServer screen, click the
the lower right corner.
To select options on the EPPServer screen, you use the touchpad
attached to the top of the Gemini. For instructions on using the
touchpad, see page 6-19.
You see the Printer Adjustment Tools window:
Printer and paper type
paper (2)
1 from each printer on Luster
paper (2)
2 from each printer on Luster
paper only
1 from each printer on Matte
paper (2)
1 from each printer on Luster
paper (2)
paper only
1 sheet from each printer on
Luster paper only (selected
from the 3 sheets printed on
each printer; see page 6-27
for details)
Printer Adjustment
Select the printer on which you
want to print the first test chart . . .
then click Print Test Chart
Maintaining the System
Total charts
4 sent in to EPSON
4; 1 from each printer sent
in to EPSON, 1 from each
printer kept for your
reference
4 sent in to EPSON
2 sent in to EPSON
2 sent in to EPSON
button in
6-25