Checking For Clogged Print Head Nozzles - Epson Gemini User Manual

3. Click the
4. Click the
5. When you see the Upload Completed message, click
6. Click

Checking for Clogged Print Head Nozzles

1. Make sure the printer on which you want to check the nozzles is not
2. Make sure Premium Luster Photo Paper is loaded in one of the printer's
3. On the Gemini EPPServer screen, click the
6-12 Maintaining the System
Execute LogUploader
button. If you're connected to the Internet via a
Upload
modem, you see a Dialing screen as the modem connects to the central
server and uploads the print log.
LogUploader screen again.
, then click
EXIT
If your printed image is unexpectedly light or faint or dots are missing
from the image, you may have clogged print head nozzles. You can run
the Nozzle Check utility to see if clogged nozzles are causing the problem.
Then, if necessary, you can run a cleaning cycle to unclog the nozzles so
they can deliver ink properly.
printing and the
Ink Out
Open the cabinet door on the right side of the Gemini so you can see the
printer's control panel lights. If the
need to replace the ink cartridge(s) indicated by the H H H H ink out lights. See
page 6-20 for instructions.
paper trays.
the lower right corner.
To select options on the EPPServer screen, you use the touchpad
attached to the top of the Gemini. For instructions on using the
touchpad, see page 6-19.
button. You see the LogUploader screen:
Click Upload
to close the Module Update screen.
Close
light is off.
light is flashing or on, you
Ink Out
Printer Adjustment
. You see the
OK
button in