Running A Cleaning Cycle - Epson Gemini User Manual

Running a Cleaning Cycle

1. Make sure the printer you want to clean is not printing and the
2. Make sure Premium Luster Photo Paper is loaded in one of the printer's
3. On the Gemini EPPServer screen, click the
4. Select the printer on which you want to clean the print head.
5. Click the
6-14 Maintaining the System
If your printed image is unexpectedly light or faint or dots are missing
from the image, you may need to run a cleaning cycle. This unclogs the
print head nozzles so they can deliver ink properly.
The cleaning cycle uses ink, so you should run it only if print quality
declines. You can use the Nozzle Check utility to determine if cleaning
has been successful or if you need to run another cleaning cycle.
light is off.
Open the cabinet door on the right side of the Gemini so you can see the
printer's control panel lights. If the
need to replace the ink cartridge(s) indicated by the H H H H ink out lights. See
page 6-20 for instructions.
paper trays.
the lower right corner.
To select options on the EPPServer screen, you use the touchpad
attached to the top of the Gemini. For instructions on using the
touchpad, see page 6-19.
You see the Printer Adjustment Tools window:
Head Cleaning
light is flashing or on, you
Ink Out
Printer Adjustment
Select the printer . . .
then click Head Cleaning
button.
Ink Out
button in