Mode Reassignment - One for All URC-7140 Manual

This feature gives you the possibility to program 2 (or more) of the same device types onto the ONE FOR ALL remote (e.g. two tv's).
In the following example you wish to set up an additional television. Therefore we will reassign (change) "sat" mode into "tv" mode.
TV2
Philips
e.g. How to reassign "sat" into "tv" so you can control your second
televion as well:
1
3 sec.
Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
2
Press 9 9 2.
3
< select >
Select the
corresponding
device e.g. TV

Mode Reassignment

+
TV1
Sony
x2
--> The blue LED will blink twice.
4
Press and release
the magic key.
5
< select >
Select the
destination
device e.g. sat
6
3 sec.
Press and release the magic key.
Congratulations! You have successfully reassigned "sat" mode to become a
second "tv" mode.
Now simply follow "ONE FOR ALL SimpleSet", "Direct Code Set Up" or the
"Search Method" to program your television in sat mode.
How to reset a device mode to its original mode?
1) Press and hold magic for 3 seconds until a mode indicator (Blue LED) stays lit.
2) Press 9 9 2.
3) Select the corresponding device mode you wish to reset to its original mode
(e.g. select sat).
4) Press the MAGIC key twice. The blue LED will blink twice.
2
--> The blue LED will blink twice.