Table of Contents
Advertisement
EXTERIOR LIGHTING
CONTROL
E327629
A
Lamps off.
B
Parking lamps on.
C
Autolamps on.
D
Headlamps on.
Rotate the control to make a selection.
Note: The lighting control defaults to
autolamps every time you switch your
vehicle on.
HEADLAMPS
USING THE HIGH BEAM
HEADLAMPS
E327570
Push the lever away from you to
switch the high beam on.
Push the lever forward again or pull the
lever toward you to switch the high beams
off.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Exterior Lighting
Slightly pull the lever toward you and
release it to flash the headlamps.
HEADLAMP INDICATORS
Lamps On
Headlamp High Beam
HEADLAMPS –
TROUBLESHOOTING
HEADLAMPS – FREQUENTLY
ASKED QUESTIONS
Why is there condensation in the
headlamps?
How much condensation is
acceptable?
94
Illuminates when you switch the
low beam headlamps or the
parking lamps on.
Illuminates when you switch the
high beam headlamps on.
Headlamps have vents to
accommodate normal changes in air
pressure. Condensation can be a
natural by-product of this design.
When moist air enters the lamp
assembly through the vents, there is a
possibility that condensation can
occur when the temperature is cold.
When normal condensation occurs, a
fine mist can form on the interior of the
lens. The fine mist eventually clears
and exits through the vents during
normal operation.
The presence of a fine mist, for
example no streaks, drip marks or
large droplets. A fine mist covers less
than 50% of the lens.
Advertisement
Table of Contents
Troubleshooting
