Table of Contents
Advertisement
Stabilizer Bar Disconnect
Switching the Stabilizer Bar
Disconnect Off
Switch the system off by pressing the
stabilizer bar disconnect button, which
reconnects the stabilizer bar if currently
disconnected.
The stabilizer bar disconnect system also
turns off when:
•
The engine is switched off.
•
You switch out of four-wheel drive low
or four-wheel drive high.
•
You select a drive mode that does not
allow the stabilizer bar to disconnect.
Note: The stabilizer bar can be reconnected
at any time, it is not necessary for the vehicle
to be on a level surface as the stabilizer bar
self-aligns.
STABILIZER BAR DISCONNECT
INDICATORS
An indicator illuminates when
you switch the stabilizer bar
E329476
disconnect system on. The color
of the indicator changes to indicate the
system status.
Amber indicates that the stabilizer bar is
disconnected.
Grey indicates that the stabilizer bar is
connected and in standby.
Red indicates that there is a fault with the
system, have the system checked as soon
as possible.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
(If Equipped)
STABILIZER BAR DISCONNECT
– TROUBLESHOOTING
STABILIZER BAR DISCONNECT –
INFORMATION MESSAGES
Message
Sta-Bar Disconnect
Not Available In
Selected Drive
Mode
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 20
MPH
Sta-Bar Discon-
nected Sta-Bar
Reconnects over 32
km/h
Sta-Bar Disconnect
Available Below 20
MPH
Sta-Bar Disconnect
Available Below 32
km/h
Sta-Bar Disconnect
Available in 4L or
4H
215
Action
The selected drive
mode does not
allow you to turn on
the stabilizer bar
disconnect feature.
See G.O.A.T.
Mode Control
(page 242).
The stabilizer bar
has been discon-
nected.
The stabilizer bar
disconnect is avail-
able below 20 mph
(32 km/h).
The selected 4WD
mode does not
allow you to turn on
the stabilizer bar
disconnect feature.
Advertisement
Table of Contents
Troubleshooting
