Canceling The Set Speed; Resuming The Set Speed; Overriding The Set Speed - Ford BRONCO 2021 Owner's Manual

Hide thumbs Also See for BRONCO 2021:
Table of Contents

Advertisement

Adaptive Cruise Control
Adaptive Cruise Control Gap Settings
Graphic
Gap Distance
Display,
Bars Indic-
ated
Between
Vehicles
1
Closest.
2
Close.
3
Medium.
4
Each time you switch the system on, it
selects the last chosen gap setting.
Following a Vehicle
When a vehicle ahead of you enters the
same lane or a slower vehicle is ahead in
the same lane, the vehicle speed adjusts
to maintain the gap setting.
Note: When you are following a vehicle and
you switch on a turn signal lamp, adaptive
cruise control may provide a small,
temporary acceleration to help you pass.
Your vehicle maintains a consistent gap
from the vehicle ahead until:
The vehicle in front of you accelerates
to a speed above the set speed.
The vehicle in front of you moves out
of the lane you are in.
You set a new gap distance.
The system applies the brakes to slow
down your vehicle to maintain a safe gap
distance from the vehicle in front of you.
The system only applies limited braking.
You can override the system by applying
the brakes.
Note: The brakes may emit noise when
applied by the system.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Dynamic
Behavior
Sport.
Normal.
Normal.
Far.
Comfort.
(If Equipped)
If the system determines that its maximum
braking level is not sufficient, an audible
warning sounds, a message appears in the
instrument cluster display and an indicator
flashes when the system continues to
brake. Take immediate action.

CANCELING THE SET SPEED

Press the button or tap the brake
pedal.
The set speed does not erase.

RESUMING THE SET SPEED

Press the button.
Your vehicle speed returns to the
previously set speed and gap setting. The
set speed displays continuously in the
information display when the system is
active.
Note: Only use resume if you are aware of
the set speed and intend to return to it.

OVERRIDING THE SET SPEED

WARNING: If you override the
system by pressing the accelerator
pedal, it does not automatically apply
the brakes to maintain a gap from any
vehicle ahead.
When you press the accelerator pedal, you
override the set speed and gap distance.
Use the accelerator pedal to intentionally
exceed the set speed limit.
239

Advertisement

Table of Contents

Troubleshooting

loading

Table of Contents