Table of Contents
Advertisement
APP PRECAUTIONS
WARNING: Driving while distracted
can result in loss of vehicle control, crash
and injury. We strongly recommend that
you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the
safe operation of your vehicle. We
recommend against the use of any
hand-held device while driving and
encourage the use of voice-operated
systems when possible. Make sure you
are aware of all applicable local laws
that may affect the use of electronic
devices while driving.
APP REQUIREMENTS
When you start an app through the system
for the first time, you could be asked to
grant certain permissions. You can review
and change the permissions that you have
granted at any time when your vehicle is
not moving. We recommend that you
check your data plan before using your
apps through the system. Using them
could result in additional charges. We also
recommend that you check the app
provider's terms and conditions and
privacy policy before using their app. Make
sure that you have an active account for
apps that you want to use through the
system. Some apps will work with no
setup. Others require you to configure
some personal settings before you can use
them.
ACCESSING APPS
Select the apps option on the
feature bar.
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Apps
ENABLING APPS ON AN IOS
DEVICE
Select the apps option on the
feature bar.
1.
Select Mobile Apps Help.
2. Follow the instructions to pair and
connect your device via Bluetooth® or
with a USB cable.
3. Start the apps on your device that you
want to use.
4. Select the app that you want to use on
the touchscreen.
Note: Some apps may run through Apple
CarPlay if it is enabled.
Note: Closing an app on your device will
close it on the touchscreen.
Note: For troubleshooting assistance select
Compatible Apps List or My App Isn't Listed
under Mobile Apps Help.
ENABLING APPS ON AN
ANDROID DEVICE
Select the apps option on the
feature bar.
1.
Select Mobile Apps Help.
2. Follow the instructions to pair and
connect your device via Bluetooth® or
with a USB cable.
3. Start the apps on your device that you
want to use.
4. Select Find Mobile Apps.
5. Select the app that you want to use on
the touchscreen.
Note: To enable apps when pairing with a
USB cable, switch on Android App via USB.
437
Advertisement
Table of Contents
Troubleshooting
