Table of Contents
Advertisement
•
Bend your legs slightly so that you can
press the pedals fully.
•
Position the shoulder strap of the
seatbelt over the center of your
shoulder and position the lap strap
tightly across your hips.
Make sure that your driving position is
comfortable and that you can maintain full
control of your vehicle.
MANUAL SEATS
HEAD RESTRAINT COMPONENTS
E308298
The head restraints consist of:
A
An energy absorbing head
restraint.
B
Guide sleeve adjust and release
button.
C
Two steel stems.
D
Guide sleeve unlock and remove
button (If equipped).
2021 Bronco (TG1) Canada/United States of America, enUSA, Edition date: 202101, First-Printing
Front Seats
ADJUSTING THE HEAD
RESTRAINT
WARNING: Fully adjust the head
restraint before you sit in or operate your
vehicle. This will help minimize the risk
of neck injury in the event of a crash. Do
not adjust the head restraint when your
vehicle is moving.
WARNING: The head restraint is a
safety device. Whenever possible it
should be installed and properly
adjusted when the seat is occupied.
Failure to adjust the head restraint
properly could reduce its effectiveness
during certain impacts.
WARNING: Adjust the head
restraints for all passengers before you
drive your vehicle. This will help minimize
the risk of neck injury in the event of a
crash. Do not adjust the head restraints
when your vehicle is moving.
Note: Adjust the seat backrest to an upright
driving position before adjusting the head
restraint. Adjust the head restraint so that
the top of it is level with the top of your head
and as far forward as possible. Make sure
that you remain comfortable. If you are
extremely tall, adjust the head restraint to
its highest position.
Pull the head restraint up to raise it.
To lower the head restraint:
1.
Press and hold the adjust and release
button.
2. Push the head restraint down.
127
Advertisement
Table of Contents
Troubleshooting
