The Scheduled "Auto Provisioning" Procedure; Upgrade Timeslot - Siemens optiPoint 150 S Administration Manual

"Auto Provisioning" Procedure

The Scheduled "Auto Provisioning" Procedure

The optiPoint 150 S can check the firmware and configuration files avail-
able on the TFTP server at predefined intervals. The Routine Upgrade
function
tool for this.
Enter the start time for the "Auto Provisioning" procedure in the form
HH:MM (00:00 - 23:59) in the input fields provided under
Upgrade Start Time in the Web-Based Management tool
The "Auto Provisioning" process is initiated every 24 hours at the set time,
if the Routine Upgrade function is activated.

Upgrade Timeslot

If you want to use the "Auto Provisioning" procedure to update multiple de-
vices, activate the Time Span function in the Web-Based Management
tool
fined timeslot, which can reduce the TFTP server's workload. You can set
a timeslot between 0 and 255 minutes.
26
page 40 must be activated on the Web-Based Management
If a Time Server
Provisioning" procedure is based on the time of the last device re-
boot. As a result, individual devices can initiate the "Auto Provision-
ing" procedure after unplanned restarts at different times than set.
page 57. This function facilitates delayed device updates in a de-
is not used, the start time for the "Auto
page 38
page 40.