Introduction - ABB PDCOM Installation Manual

D IS TR I BUTI ON SOLUTI ONS
—

1. Introduction

The installation manual contains instructions on
how to install PDCOM. The manual describes
procedures for mechanical and electrical
installation. The chapters are set out in the order in
which the device should be installed and connected
to the circuit breaker.
1.1
This manual is for use by the personnel responsible
for installing the product hardware.
The installation personnel must possess basic
knowledge about handling electronic equipment.
1.2
The Installation manual contains instructions on
how to install PDCOM. The manual describes
procedures for mechanical and electrical
installation. The chapters are set out in the order in
which the device should be installed and connected
to the switchgear.
1.3
Document
revision/date
2020-09-13
1.4
Product series- and product specific manuals can be
downloaded from the ABB web site.
Intended recipients
Product documentation
Revision history
Product series
version
2.1
Download the latest documents from
the ABB web site
Related documentation
1.5
History
First release Although warning hazards are related to personal
injury, it is necessary to understand that under
certain operational conditions, operation of
damaged equipment may result in degraded
process performance leading to personal injury or
death. Therefore, comply fully with all warning and
caution notices.
Symbols
The electrical warning icon indicates the
presence of a hazard which could result
in electrical shock.
The warning icon indicates the presence
of a hazard which could result in
personal injury
The caution icon indicates important
information or warnings related to the
subject discussed in the text. It might
indicate the presence of a hazard which
could result in damage to software,
equipment or property.
The information icon alerts the reader of
important facts and conditions.
The tip icon indicates advice on, for
example, how to design your project or
use a certain function.
3