1. Introduction
SD-Pocket permits wireless connection to the ABB SACE SpA trip units supplied with the Bluetooth communication
module. Two versions of this module are available:
•
internal module (PR120/D-BT WL)
•
external module (BT030) connected to the trip unit to the front test socket
SD-Pocket can communicate with the following trip units:
(*) without PR120/D-BT
1.1 System requirements
This software is available for installation on pocket PCs (PDA: Personal Digital Assistant).
1.1.1 Hardware
•
Integrated Bluetooth module with a minimum range of 10 meters (see the PDA technical characteristics)
•
RAM: 64 MB
•
ROM: 32 MB
•
30 MB free space
•
PDA screen size: 240 x 320 pixels
1.1.2 Software
•
Windows Mobile 2003 or Windows Mobile 5.0.
•
Verify on the producer's website if firmware updates are available.
•
Bluetooth Widcomm driver (see the PDA instruction manual)
For the installation software:
•
PC operated by Windows 2000 e Windows XP
•
Active Sync 3.8 and following (supplied with the PDA)
1.1.3 PDA models
This software has been tested on the following PDA devices:
1. iPAQ Compaq 5550
2. iPAQ Compaq 3970
3. iPAQ Compaq 5450
4. iPAQ Compaq 2110
ABB
ABB SACE
Trip unit
PR120/D-BT WL
PR121/P
PR122/P
PR123/P
PR222DS/P
PR222DS/PD
PR223EF
PR223DS
PR232/P
PR331/P
PR332/P
PR333/P
Table 1. Supported devices
SACE SD-Pocket
BT030
NO
YES
YES
YES (*)
YES
YES (*)
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO
YES
1SDH000503R0002
L3104
4/25