Cabinet Settings - Metro DataVac 9 Series Instructions For Use Manual

Cabinet Settings

Configure Date/Time, Temperature scale, Low temp alarm, Timers, Auto start time, Language, Control lock,
and to access cabinet information. -
DATE & TIME: Allows the time, date, and formats to be set. Date and time need to be set before the AUTO START
1.
feature can be used.
2. SET ALARMS: Allows the setting of the low temperature alarm set point, and alarm volume. Alarm volume can also
be turned off. Visual indicators and icons will still be activated for low temperature and low water alerts if alarm
volume is set to off.
3. TIMERS: Allow the programming of between 1 and 15 timers or "zones" within the cabinet. Timers can be set to
"count-up" or "count-down". The timers make it possible to easily manage first-in-first-out (FIFO), monitor holding
times within the zones for maintaining food quality and consistency.
4. TEMPERATURE SCALE: Allows the temperature scale to be changed to Fahrenheit or Celsius.
5. AUTO START: Allows the programming of timers that will automatically turn the cabinet on at specific times for
different days of the week.
6. LANGUAGE: Allows the user interface language to be changed to English, Spanish, or French.
CONTROL LOCK: Allows passcode-protected locking of the controller to prevent changes from being made to the
7.
cabinet settings. Some functions (Help, Menu Preset selection, and Change Setpoints) can be enabled if desired.
"1969" is the default PIN for the user lock-out function. This PIN can be changed if desired.
8. CABINET INFO: Allows the cabinet serial number to be entered and saved for future reference. USB functionality
allows the cabinet data (menu presets, alarm, auto start, and timer settings) to be saved to and loaded from a USB
flash drive. Controller firmware can also be updated through the USB port. A factory reset can also be performed
here.
C5 9 Series Cabinets — INSTRUCTIONS FOR USE
13
www.metro.com
L01-419
REV S 11/22