Maintenance; 16_Preventative Maintenance Schedule - Keiser INFINITY 003020BP Operation Manual

FUNCTIONAL TRAINER | OPERATION MANUAL

MAINTENANCE

CAUTION: SERVICE AND REPAIR SHALL ONLY BE PERFORMED BY KEISER-CERTIFIED TECHNICIANS.
Failure to follow these instructions can result in serious injury.
PREVENTATIVE MAINTENANCE SCHEDULE
CAUTION: THE HIGHEST LEVEL OF EQUIPMENT SAFETY CAN ONLY BE ENSURED IF EQUIPMENT IS
REGULARLY INSPECTED FOR DAMAGE AND WEAR. Always check that the Functional Trainer is securely
fastened to the Free-standing or Floor Mounted Base before use (no tilt, lean, or any other movement of the
unit should be detected during use). Immediately replace damaged, worn, or broken parts. Do not use the
Functional Trainer until all repairs have been completed and tested by a Keiser-certified technician.
Daily
Weekly
Monthly
Quarterly
Annually and
other Required
Maintenance
IMPORTANT: Do not use household or industrial cleaners as they contain caustic chemicals that can destroy the paint finish
and cause corrosion. Use only mild detergent (neutral, non-caustic) to clean.
Contact Keiser Customer Support for replacement parts order, or for any matters regarding the safe operation of your Functional
Trainer (see back cover for contact information).
• Wipe down the external body/parts using a moist cloth and a mild detergent (neutral,
non-caustic). Wipe dry the equipment.
• Check that parts most susceptible to wear are not damaged or broken:
– Pulleys, Cable, Speed Clip, Handle, Thumb Buttons, and Adjustment Plunger.
• Check to ensure that the Functional Trainer is in safe and proper working order:
– The Functional Trainer is securely fastened to the base (floor mount or free-
standing). There should be no movement of the unit in any direction during use.
– Press the "+" and then "-" Thumb Buttons a few times to ensure air cycles
through and that the Power Display powers on.
– Cable travels freely and smoothly without binding.
• Hand wash the strap material of accessories using mild detergent (neutral, non-caustic)
and water. Air dry only.
• Inspect Air Line for kinks, tears, or breaks.
• Clean the external body/parts thoroughly, targeting areas that come in contact with
sweat, using a moist cloth and a mild detergent (neutral, non-caustic). Wipe dry the
equipment.
• Check mount hardware (screw anchors) and externally visible screws are fastened with
no looseness. There should be no movement of the unit in any direction during use.
• For complete instructions, see page 18 "Annual Maintenance."
• Battery Replacement. The low battery signal ("Lo-bA") will appear on the Power Display
when it is time to replace the batteries. Refer to page 17 "Battery Replacement" for
complete instructions.
For establishments with multiple Functional Trainer machines, replacement of all
Power Display batteries at the same time is recommended.
NOTE: Your Keiser Air Compressor (not included with your Functional Trainer) requires
basic annual maintenance. For complete Keiser Air Compressor maintenance instructions,
download the user manual at keiser.com/support (search: Air Compressor manuals).
16