Smtp - Compaq iPAQ CP-2E User Manual

SMTP

Connection Point can send an e-mail containing log events.
1. Click on SMTP at the left. The SMTP page is displayed.
2. Click Enable.
3. Under the Address Info section, enter your information in the
required fields.
Note: Mail Server name is provided by your ISP.
4. Under the Send Log or Alert section, enter the desired timeframe in
which you want to recieve the e-mail.
5. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
6. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
iPAQ Connection Point CP-2E User Guide
Advanced Setup Icons
5–23