Pppoe - Compaq iPAQ CP-2E User Manual

Installation and Configuration
Configuring Static Internet IP
1. Click the Static IP. The Static Internet IP page is displayed.
2. Type the static IP address provided by your ISP into the Internet IP
Address field.
3. Type the subnet mask provided by your ISP into the Subnet Mask
field.
4. Type the IP address of the default gateway provided by your ISP into
the Default Gateway field.
5. Type the IP address of a primary DNS server provided by your ISP
into the DNS Server 1 field. If an address for a secondary DNS server
is provided, type that into the DNS Server 2 field.
6. Click Next. The Reboot dialog box is displayed. The Connection
Point CP-2E must be rebooted for applied changes to take effect.

PPPoE

This setting configures your Connection Point CP-2E to connect to a DSL
service using PPPoE. A PPPoE password is provided by your ISP.
2–10 iPAQ Connection Point CP-2E User Guide