Configuring Pppoe - Compaq iPAQ CP-2E User Manual

Configuring PPPoE

1. Click the PPPoE. The PPPoE page is displayed.
2. Type your ISP user name into the User Name field.
3. Type your ISP password into the Password field.
4. Type your ISP password into the Confirm Password field.
Note: The above three entries are required, and may be case-sensitive.
5. If a service name is required by your ISP, type the service name into
the Service Name field. Otherwise, leave the field blank.
6. If your ISP requires you to specify the IP address of a DNS server,
click the Manual radio button and type the IP address into the DNS
Server 1 field. If there is a second DNS server IP address, type it into
the DNS server 2 field.
7. Click Next. The Reboot dialog box is displayed. The Connection
Point CP-2E must be rebooted for applied changes to take effect.
iPAQ Connection Point CP-2E User Guide
Installation and Configuration
2–11