What Else Do I Need - Compaq iPAQ CP-2E User Manual

Introduction

What Else Do I Need?

To use the Connection Point CP-2E, you need:
> Microsoft
> A CD-ROM drive
> An external cable or DSL modem with an RJ45 Ethernet port
> Internet Explorer 4.0 or higher, Netscape Navigator 6 or higher, or
MSN Explorer
> One network adapter for each PC
— Ethernet: Any 10Mbps or 100Mbps compatible Ethernet adapter.
> Additional Ethernet equipment:
— The Connection Point CP-2E comes with a built-in four-port
Ethernet switch, so you can connect up to four PCs without
purchasing an additional hub or switch. More than four Ethernet
PCs will require an additional hub or switch.
— Ethernet cabling to connect each PC to the Connection Point
CP-2E. Use Category 3 cabling or better for 10 Mbps, Category 5
cabling or better for 100 Mbps.
1–4
® ®
Windows 98/98SE, NT 4.0, 2000, ME, XP or higher
iPAQ Connection Point CP-2E User Guide