Changing The Subnet - Compaq iPAQ CP-2E User Manual

Subnet Mask: Displays the subnet mask that determines which parts
of the IP address are used in the packet routing process. The default
subnet mask of the LAN interface on the Connection Point CP-2E is
255.255.255.0. The first three octets of the subnet mask are
unchangeable. A zero entry for the fourth octet defines a full Class C
local network. You can scale the network down from a full Class C by
entering a number other than zero in the fourth octet in the mask.

Changing the Subnet

1. Click the LAN link at the left. The LAN page is displayed.
2. To change the IP address of the LAN interface, type new octets into
the LAN IP Address field.
3. To change the subnet mask, type new octets into the Subnet Mask
field.
4. Click Apply. The Connection Point CP-2E must be rebooted for
applied changes to take effect.
5. Click OK. You can reboot the Connection Point CP-2E at any time by
clicking the Reboot button at the left.
iPAQ Connection Point CP-2E User Guide
Advanced Setup Icons
5–5