Setting The Hard Disk Drive Configuration - Epson Equity 386SX User Manual

Note
The Setup program automatically saves the time and date
when you press
change the time or date and then exit the Setup program
without saving your changes, the new time and date still
take effect.

Setting the Hard Disk Drive Configuration

If your computer came with a 40MB or 100MB hard disk, your
computer's hard disk configuration has already been set for you
at the factory and you can skip this section.
If you installed or removed a hard disk, follow these steps to set
the computer's hard disk configuration:
1. At the main Setup menu, highlight
drive.
Drive 1:
Drive 2:
The
Type
installed in your computer. See Appendix E for a list of hard
disk drive types, and the documentation supplied with your
hard disk to find the correct type for the hard disk drive
installed in your computer.
The None after
second hard disk.
If the displayed settings match your hard disk configuration,
you can skip the rest of this section.
If a
setting
about your hard disk configuration, go to step 2.
after typing-each one. If you
Enter
Your current settings appear:
Type
None
number indicates the type of hard disk
Drive 2
is incorrect, or if you want to see more details
Running the Setup Program
Hard disk
17
indicates that there is not a
2-17