Continuing From An Error Message - Epson Equity 386SX User Manual

Continuing From an Error Message

If your computer has never been set up, you may see an error
message, such as the following:
162
- System options not set
(Resume = "F1" key)
If you see an error message like this one, follow these steps to
proceed:
1. Press
messages, such as the following:
!!!!! Error(s) detected !!!!!
The error message following the diamond indicates the
condition causing the error. There may be more than one
error listed in the message. Here are the error messages you
may see:
Time is invalid
HDD and/or HDC failed initialization
Memory size is incorrect, correction made
Incorrect
Checksum is incorrect
Real-time clock has lost power
Running the Setup Program
2-4
(Run SETUP in REFERENCE DISK)
The computer beeps and the screen displays
F1.
configuration