Epson Equity 386SX User Manual page 63

Press to move the cursor block into the submenu.
2. Enter
You see:
3. If you want to change the serial port setting, be sure
S e r i a l is highlighted and press
change the parallel port setting, highlight
and press
Enter.
4. Use L or t to highl' h h
you selected and press
setting.
Note
If you add an option card with a parallel or serial port and
highlight a setting that causes a conflict between your
built-in ports and the port on the option card, you see
this message:
Conflict with option card
Highlight a setting that is appropriate for your system
configuration and press
If you want to change the setting for the other port, return
to step 3.
5. When the serial and parallel port settings are correct,
highlight
*** SAVE SETTINGS
The cursor block returns to the main Setup menu
Enter.
and you see your updated serial and parallel interface
settings.
Enter.
The cursor block moves into the submenu.
The screen displays the new
Enter.
Enter.
Running the Setup Program
If you want to
Parallel
*** and press
2-25